Blu-ray to 1080p MKV
All the software you need to find here
This is to create a MKV bareback, so as to create a MKV 1080p, taking into account that will occupy the space is quite high.
If what you want in a MKV weighing less (720p) look at this another shipment
First of all will make a backup copy of your Blu-ray (we will
by AnyDVD HD).
We will put the film on Blu-ray and we will go to the reader that there are small icon on the bottom right, and pressing the right button on the AnyDVD HD icon, select "Make Rip DVD video to the hard drive ..."
We will open a window where you pick where we want to keep our copy and then have to squeeze in "DVD Copy"
Now, we can go for a walk, as it surely will take a while.
When finished, we will have the Blu-ray on a hard drive.
Once we have the backup is done, we will have to fetch the file m2ts to be within the structure that Blu-ray will have copied to the computer.
'll go into the folder where you have saved, then in BDMV, then in STREAM and there we will find in file. m2ts, we will have to select the greatest of all.
Well, that's the file that has the video and release the audio / s
Now open the tsMuxer.
Squished together in 'add'
m2ts file and add the above.
Now, what we will do is select the video, with audio you want to insert.
We will have to select low Tracks must file under 'Codec' puts as H.264 is the video.
Then let alone selected, the audio you want. I recommend that you seleccionéis only one, maximum two, and if that might be the AC3. So that the sound is Spanish, you should look at the column of 'lang', the Spanish language is what makes' spa ', deselect everything else.
Once done, we must dial in "blue" and the video selected at the bottom, and select dial, as shown in the picture below, 'Change fps,' and select 24000/1001, in this way, the video will keep the original fps.
After you select in 'Demuxer' and squeezing in 'Browse' in that folder will tell you what we want to copy.
Once we have implemented these measures, tightening in 'Start demuxing'
When tight ends' OK 'and we will have created a file 264 (video) and an archive. Ac3 (audio).
Now we open the 'mkvmerge'
Tight 'add'
select the file and the first 264 we've created with the tsMuxeR.
When we do we will leave the following warning:
Basically, what we are saying here is that this video is not saying what is your Frame Rate and that if he did not say anything, it is assumed that the 25fps. We will have to tell you what your frame rate or we would have real problems later.
We accept and we will have the video within the 'mkvmerge GUI'
What set in "Blue" and at the bottom, tightening on the tab 'Format specific options'
Here in 'FPS', we must put the real Frame Rate, the actual frame rate on a Blu-ray (that is the case that we tried) is 24000/1001. This is what we choose, that is, we shall read as follows:
Now, go back to squeeze in 'add' and select the audio, which in this case is. Ac3
As shown in the picture, we will dial in blue sound AC3, and the tab "General track options' in 'Language' select 'spa (castilia)'
If we put multiple audio, we can put in 'Track Name' the name of the language, Castilian, English, French, German, etc ...
At the bottom, in 'Output filename' through 'Browse' where we say we want to save it and you put a name.
Then, tightening in 'Start muxing "and begin processing:
When finished, press' OK 'and we will have a 1080p MKV
Logically, this deal MKV much.
If what we wish is a MKV occupying less, it's best to pass 1080p to 720p.
A greeting.
Related entries
If you enjoyed this post, please consider to leave a comment or subscribe to the feed and get future articles delivered to your feed reader.
Comments
Hello. Do not you know how to thank you for this tutorial on how to spend the blu-Ray MKV to take hours looking for how to do it because a couple of days ago I bought a BD recorder but my intention now is to fill a new hard disk I have with All copies of my movies on BD and be able to see them with my PS3 through the external HDD. The only difference is that the PS3 will not play the MKV but this is less because of what I have to leave the file to Mp4. The most difficult was how to remove the files from the original BD. And look, as easy as using the AnyDVD hd.
Huge thanks.
Hi, thanks for your tutorial. But as if to operate using the TSmuxer appears in the video format VC1
Could it help me? Thanks in advance
Hello
I have not found even one of them, but try to use the SUPER, it's easy to use.
If what evidence, if comment is well, I would say yes, but I do not know for sure.
you'll find it here.
Although the tutorial is to move from a m2ts WMV, simplemete do that is to m2ts mkv
A greeting
Hello, very good tutorial, the only thing that I have a problem with AnyDVD, which when put in the bluray drive starts AnyDVD me that the trial version support for bluray is not available, and I do not unprotects the movie. There is some form of free version that works even once to try it?
[...] 12, 2008 This shipment, it is just to comment on the tutorial that I have managed to move from a Blu-ray to a MKV file with 1080p resolution. Many people were taking the problem to them desynchronized sound, so I [...]
[...] There are two possibilities. 1 .- To pass your Blu-ray to 1080p MKV [...]